813 research outputs found

    Smart Power Devices and ICs Using GaAs and Wide and Extreme Bandgap Semiconductors

    Get PDF
    We evaluate and compare the performance and potential of GaAs and of wide and extreme bandgap semiconductors (SiC, GaN, Ga2O3, diamond), relative to silicon, for power electronics applications. We examine their device structures and associated materials/process technologies and selectively review the recent experimental demonstrations of high voltage power devices and IC structures of these semiconductors. We discuss the technical obstacles that still need to be addressed and overcome before large-scale commercialization commences

    Velocity autocorrelation function of a Brownian particle

    Full text link
    In this article, we present molecular dynamics study of the velocity autocorrelation function (VACF) of a Brownian particle. We compare the results of the simulation with the exact analytic predictions for a compressible fluid from [6] and an approximate result combining the predictions from hydrodynamics at short and long times. The physical quantities which determine the decay were determined from separate bulk simulations of the Lennard-Jones fluid at the same thermodynamic state point.We observe that the long-time regime of the VACF compares well the predictions from the macroscopic hydrodynamics, but the intermediate decay is sensitive to the viscoelastic nature of the solvent.Comment: 7 pages, 6 figure

    Integralni pristup sustavima energetske elektronike

    Get PDF
    Today\u27s power electronics systems are typically manufactured using non-standard parts, resulting in labor-intensive manufacturing processes, increased cost and poor reliability. As a possible way to overcome these problems, this paper discusses an integrated approach to design and manufacture power electronics systems to improve performance, reliability and cost effectiveness. Addressed in the paper are the technologies being developed for integration of both power supplies and motor drives. These technologies include the planar metalization to eliminate bonding wires, the integration of power passives, the integration of current sensors, the development of power devices to facilitate integration as well as to improve performance, and the integration of necessary CAD tools to address the multidisciplinary aspects of integrated systems. The development of Integrated Power Electronics Modules (IPEMs) is demonstrated for two applications: (1) 1 kW asymmetrical half-bridge DC-DC converter and (2) 1–3 kW motor drive for heating, ventilation and air conditioning (HVAC). Electrical and thermal design tradeoffs of IPEMs and related enabling technologies are described in the paper.Današnji sustavi energetske elektronike se obično proizvode iz nestandardnih dijelova. Posljedica toga je laboratorijska proizvodnja elektroničkih učinskih pretvarača, povećani troškovi i smanjena pouzdanost. Jedan od mogućih načina prevladavanja ovih poteškoća jest integralni pristup projektiranju i proizvodnji sustava energetske elektronike. Posebice se razmatraju tehnologije razvijene za integraciju učinskih krugova i motora. Ove tehnologije uključuju postupke planarne metalizacije za izbjegavanje žičanih vodova, integraciju pasivnih dijelova učinskih krugova, integraciju strujnih senzora, te razvoj takvih poluvodičkih komponenata koje olakšavaju integraciju i poboljšavaju karakteristike uređaja. Pri projektiranju, zbog multidisciplinarnih aspekata integriranih sustava, treba primijeniti nužne CAD alate. Razvoj integriranih modula elektroničkih učinskih pretvarača (engl. integrated power electronics modules, IPEM) ilustriran je na dvije primjene: (1) istosmjerni pretvarač snage 1 kW u asimetričnom polumosnom spoju i (2) elektromotorni pogon snage 1 . . . 3 kW za grijanje, ventilaciju i klimatizaciju (engl. heating, ventilation and air conditioning, HVAC). Na IPEM-u objašnjeni su projektantski i tehnološki kompromisi električkog i toplinskog projekta

    A coupled optical-thermal-electrical model to predict the performance of hybrid PV/T-CCPC roof-top systems

    Get PDF
    A crossed compound parabolic concentrator (CCPC) is applied into a photovoltaic/thermal (PV/T) hybrid solar collector, i.e. concentrating PV/T (CPV/T) collector, to develop new hybrid roof-top CPV/T systems. However, to optimise the system configuration and operational parameters as well as to predict their performances, a coupled optical, thermal and electrical model is essential. We establish this model by integrating a number of submodels sourced from literature as well as from our recent work on incidence-dependent optical efficiency, six-parameter electrical model and scaling law for outdoor conditions. With the model, electrical performance and cell temperature are predicted on specific days for the roof-top systems installed in Glasgow, Penryn and Jaen. Results obtained by the proposed model reasonably agree with monitored data and it is also clarified that the systems operate under off-optimal operating condition. Long-term electric performance of the CPV/T systems is estimated as well. In addition, effects of transient terms in heat transfer and diffuse solar irradiance on electric energy are identified and discussed

    Improved Analysis of GW150914 Using a Fully Spin-Precessing Waveform Model

    Get PDF
    This paper presents updated estimates of source parameters for GW150914, a binary black-hole coalescence event detected by the Laser Interferometer Gravitational-wave Observatory (LIGO) in 2015 [Abbott et al. Phys. Rev. Lett. 116, 061102 (2016).]. Abbott et al. [Phys. Rev. Lett. 116, 241102 (2016).] presented parameter estimation of the source using a 13-dimensional, phenomenological precessing-spin model (precessing IMRPhenom) and an 11-dimensional nonprecessing effective-one-body (EOB) model calibrated to numerical-relativity simulations, which forces spin alignment (nonprecessing EOBNR). Here, we present new results that include a 15-dimensional precessing-spin waveform model (precessing EOBNR) developed within the EOB formalism. We find good agreement with the parameters estimated previously [Abbott et al. Phys. Rev. Lett. 116, 241102 (2016).], and we quote updated component masses of 35+5−3M⊙ and 30+3−4M ⊙ (where errors correspond to 90% symmetric credible intervals). We also present slightly tighter constraints on the dimensionless spin magnitudes of the two black holes, with a primary spin estimate < 0.65 and a secondary spin estimate < 0.75 at 90% probability. Abbott et al. [Phys. Rev. Lett. 116, 241102 (2016).] estimated the systematic parameter-extraction errors due to waveform-model uncertainty by combining the posterior probability densities of precessing IMRPhenom and nonprecessing EOBNR. Here, we find that the two precessing-spin models are in closer agreement, suggesting that these systematic errors are smaller than previously quoted

    Bench to Bed Evidences for Pharmacokinetic and Pharmacodynamic Interactions Involving Oseltamivir and Chinese Medicine

    Get PDF
    Oseltamivir (OA), an ethyl ester prodrug of oseltamivir carboxylate (OC), is clinically used as a potent and selective inhibitor of neuraminidase. Chinese medicines have been advocated to combine with conventional drug for avian influenza. The current study aims to investigate the potential pharmacokinetic and pharmacodynamic interactions of a Chinese medicine formula, namely, Yin Qiao San and Sang Ju Yin (CMF1), commonly used for anti-influenza in combination with OA in both rat and human, and to reveal the underlined mechanisms. It was found that although Cmax, AUC and urinary recovery of OC, as well as metabolic ratio (AUCOC/AUCOA), were significantly decreased in a dose-dependent manner following combination use of CMF1 and OA in rat studies (P<0.01), such coadministration in 14 healthy volunteers only resulted in a trend of minor decrease in the related parameters. Further mechanistic studies found that although CMF1 could reduce absorption and metabolism of OA, it appears to enhance viral inhibition of OA (P<0.01). In summary, although there was potential interaction between OA and CMF1 found in rat studies, its clinical impact was expected to be minimal. The coadministration of OA and CMF1 at the clinical recommended dosages is, therefore, considered to be safe

    Immunofluorescence Assay for Serologic Diagnosis of SARS

    Get PDF
    We evaluated a virus-infected cell-based indirect immunofluorescence assay for detecting anti–severe acute respiratory syndrome-associated coronavirus (SARS-CoV) immunoglobulin (Ig) G antibody. All confirmed SARS cases demonstrated seroconversion or fourfold rise in IgG antibody titer; no control was positive. Sensitivity and specificity of this assay were both 100%. Immunofluorescence assay can ascertain the status of SARS-CoV infection

    Population-level impact and herd effects following the introduction of human papillomavirus vaccination programmes: updated systematic review and meta-analysis

    Get PDF
    Background More than 10 years have elapsed since human papillomavirus (HPV) vaccination was implemented. We did a systematic review and meta-analysis of the population-level impact of vaccinating girls and women against human papillomavirus on HPV infections, anogenital wart diagnoses, and cervical intraepithelial neoplasia grade 2+ (CIN2+)to summarise the most recent evidence about the effectiveness of HPV vaccines in real-world settings and to quantify the impact of multiple age-cohort vaccination.Methods In this updated systematic review and meta-analysis, we used the same search strategy as in our previous paper. We searched MEDLINE and Embase for studies published between Feb 1, 2014, and Oct 11, 2018. Studies were eligible if they compared the frequency (prevalence or incidence) of at least one HPV-related endpoint (genital HPV infections, anogenital wart diagnoses, or histologically confirmed CIN2+) between pre-vaccination and post-vaccination periods among the general population and if they used the same population sources and recruitment methods before and after vaccination. Our primary assessment was the relative risk (RR) comparing the frequency (prevalence or incidence) of HPV-related endpoints between the pre-vaccination and post-vaccination periods. We stratified all analyses by sex, age, and years since introduction of HPV vaccination. We used random-effects models to estimate pooled relative risks.Findings We identified 1702 potentially eligible articles for this systematic review and meta-analysis, and included 65 articles in 14 high-income countries: 23 for HPV infection, 29 for anogenital warts, and 13 for CIN2+.After 5\u20138 years of vaccination, the prevalence of HPV 16 and 18 decreased significantly by 83% (RR 0\ub717, 95% CI 0\ub711\u20130\ub725) among girls aged 13\u201319 years, and decreased significantly by 66% (RR 0\ub734, 95% CI 0\ub723\u20130\ub749) among women aged 20\u201324 years. The prevalence of HPV 31, 33, and 45 decreased significantly by 54% (RR 0\ub746, 95% CI 0\ub733\u20130\ub766) among girls aged 13\u201319 years. Anogenital wart diagnoses decreased significantly by 67% (RR 0\ub733, 95% CI 0\ub724\u20130\ub746) among girls aged 15\u201319 years, decreased significantly by 54% (RR 0\ub746, 95% CI 0.36\u20130.60) among women aged 20\u201324 years, and decreased significantly by 31% (RR 0\ub769, 95% CI 0\ub753\u20130\ub789) among women aged 25\u201329 years. Among boys aged 15\u201319 years anogenital wart diagnoses decreased significantly by 48% (RR 0\ub752, 95% CI 0\ub737\u20130\ub775) and among men aged 20\u201324 years they decreased significantly by 32% (RR 0\ub768, 95% CI 0\ub747\u20130\ub798). After 5\u20139 years of vaccination, CIN2+ decreased significantly by 51% (RR 0\ub749, 95% CI 0\ub742\u20130\ub758) among screened girls aged 15\u201319 years and decreased significantly by 31% (RR 0\ub769, 95% CI 0\ub757\u20130\ub784) among women aged 20\u201324 years.Interpretation This updated systematic review and meta-analysis includes data from 60 million individuals and up to 8 years of post-vaccination follow-up. Our results show compelling evidence of the substantial impact of HPV vaccination programmes on HPV infections and CIN2+ among girls and women, and on anogenital warts diagnoses among girls, women, boys, and men. Additionally, programmes with multi-cohort vaccination and high vaccination coverage had a greater direct impact and herd effects

    Academic Performance and Behavioral Patterns

    Get PDF
    Identifying the factors that influence academic performance is an essential part of educational research. Previous studies have documented the importance of personality traits, class attendance, and social network structure. Because most of these analyses were based on a single behavioral aspect and/or small sample sizes, there is currently no quantification of the interplay of these factors. Here, we study the academic performance among a cohort of 538 undergraduate students forming a single, densely connected social network. Our work is based on data collected using smartphones, which the students used as their primary phones for two years. The availability of multi-channel data from a single population allows us to directly compare the explanatory power of individual and social characteristics. We find that the most informative indicators of performance are based on social ties and that network indicators result in better model performance than individual characteristics (including both personality and class attendance). We confirm earlier findings that class attendance is the most important predictor among individual characteristics. Finally, our results suggest the presence of strong homophily and/or peer effects among university students

    Effects of microperfusion in hepatic diffusion weighted imaging

    Get PDF
    Clinical hepatic diffusion weighted imaging (DWI) generally relies on mono-exponential diffusion. The aim was to demonstrate that mono-exponential diffusion in the liver is contaminated by microperfusion and that the bi-exponential model is required. Nineteen fasting healthy volunteers were examined with DWI (seven b-values) using fat suppression and respiratory triggering (1.5 T). Five different regions in the liver were analysed regarding the mono-exponentially fitted apparent diffusion coefficient (ADC), and the bi-exponential model: molecular diffusion (D (slow) ) microperfusion (D (fast) ) and the respective fractions (f (slow/fast)). Data were compared using ANOVA and Kruskal-Wallis tests. Simulations were performed by repeating our data analyses, using just the DWI series acquired with b-values approximating those of previous studies. Median mono-exponentially fitted ADCs varied significantly (P <0.001) between 1.107 and 1.423 x 10(-3) mm(2)/s for the five regions. Bi-exponential fitted D-slow varied between 0.923 and 1.062 x 10(-3) mm(2)/s without significant differences (P = 0.140). D (fast) varied significantly, between 17.8 and 46.8 x 10(-3) mm(2)/s (P <0.001). F-tests showed that the diffusion data fitted the bi-exponential model significantly better than the mono-exponential model (F > 21.4, P <0.010). These results were confirmed by the simulations. ADCs of normal liver tissue are significantly dependent on the measurement location because of substantial microperfusion contamination; therefore the bi-exponential model should be used. Diffusion weighted MR imaging helps clinicians to differentiate tumours by diffusion properties Fast moving water molecules experience microperfusion, slow molecules diffusion Hepatic diffusion should be measured by bi-exponential models to avoid microperfusion contamination Mono-exponential models are contaminated with microperfusion, resulting in apparent regional diffusion differences Bi-exponential models are necessary to measure diffusion and microperfusion in the liver
    corecore